Rhino Slider 42” EVO/ARC1 with Rhino Motion Control Hire & Rental
| Duration | Rate (ex VAT) |
|---|---|
| 1 day | £80.00 |
| 3 days | £160.00 |
| 10 days | £237.00 |
| Required deposit | £130.91 |
Select hire dates to confirm stock for your period.
- 1 x Rhino 42" Carriage
- 1 x Teethed Belt for 42" Setup
- 4 x Adjustable Feet
- 1 x Rhino Motor Unit w/ 2x Fixing screws
- 1 x Rhino Control Unit
- 1 x Ethernet Cable
- 1 x D-Tap Power Cable
- 1 x 3.5mm to 3.5mm Control Cable
- 1 x 3.5mm to USB2 Control Cable
- 2 x 3.5mm to USB-c Control Cable
- 1 x 24" Alternative Carriage
- 1 x Teethed Belt for 24" Setup
- 1 x Manfrotto 502 Head with Plate and 2 screws
- 1 x Pan Handle
- 1 x Peli 1062 Hard Case
- 1 x Small Bag
Developed through a kickstarter campaign, the Rhino Evo Arc1 slider is a fantastically compact and smooth slider for DSLR and Mirrorless Cameras. The Rhino Motion Control allows you to programme set moves over a specific amount of time, making it great for timelapses or slow moves.
Comes with a Manfrotto 502 Head for manual pan/tilt.
More Information
The slide action is very smooth and consistent. By simply attaching the motor on the mount on the right side of the slider, you'll be able to control the side to side movement of your camera using the easy-to-use Motion Controller. The controller connects securely to the motor via a standard Ethernet cable, and has several options for movement options.
There is a noise from the motor action that would likely be picked up by an onboard or nearby mic, so whilst it can be used for interviews as a moving B cam shot, you need to be very wary of the noise created by the motor, using only tie-clip mics and carefully checking it is far enough away to not pick up the motor sound.
It comes with a manual flywheel that attaches where you would otherwise attach the motor to allow for a silent manual slide.
Reviews
No published reviews yet.